TracPipe Flexible Gas Piping
- Corrugated Stainless Steel 300 Series
- with yellow Polyethylene jacket
FGP-SS4-500-CUT 1/2" Cut to length
FGP-SS4-750-100 3/4" x 100' coils
FGP-SS4-750-CUT 3/4" Cut to length
TracPipe CounterStrike
- Corrugated Stainless Steel 300 Series
- with black conductive jacket
PDF - 6 page Brochure- PDF - 2 page Brochure
FGP-CS-005-100 1/2" x 100' coil
FGP-CS-005-500 1/2" x 500' coil
FGP-CS-007-025 3/4" x 25' cut
FGP-CS-007-100 3/4" x 100' coils
FGP-CS-007-250 3/4" x 250' coils
FGP-CS-010-025 1" x 25' cut
FGP-CS-010-100 1" x 100' coils
AutoFlare Coupling
- connects 2 ends of TracPipe together
FGP-CPLG-007 3/4"
AutoFlare Male Adapter
- AutoFlare X MIP
FGP-MA-007 3/4"
FGP-MA-010 1"
FGP-MA-101 3/4" x 1/2" MIP
AutoFlare FeMale Adapter
- AutoFlare X FIP
FGP-FA-007 3/4"
AutoFlare Termination Mount
- used where coming throu a wall to a fixture
- AutoFlare on backside -- MIP on front side
FGP-TM-007 3/4"
FGP-TM-010 1"
AutoFlare Flange Mount Fitting
- used where coming throu a floor to a fixture
- AutoFlare on backside -- MIP on front side
FGP-BFF-007 3/4"
FGP-BFF-010 1"
Key Valve Bracket
- used for key valves like log lighter valve
- AutoFlare by MIP
AutoFlare Tee
- fits TracPipe on all 3 sides
FGP-T-007 3/4"
FGP-T-094 3/4" x 1/2" x 1/2"
FGP-T-101 3/4" x 3/4" x 1/2"
Replacement AutoFlare Rings
- to replace lost rings
- sold each - requires 2 per AutoFlare
FGP-RING-007 3/4"
Coated Manifold
- 3/4" inlet and five (5) 1/2" outles
Manifold Bracket
- for use with manifold FGP-MI-PC only
Fireplace Stub-Out
- 1/2" MIP inlet and outlet
- angle of plate matches most fireplace boxs
Floppy Steel Conduit
- Protection device - fits over TracPipe to protect from nails throu studs
- cut in 1 ft. lengths
- may be stacked for longer lenths
FGP-FGP-750CT Fits over 3/4"
Quarter Striker Plate
- Protection device - Hardened Carbon Steel
Half Striker Plate
- Protection device - Hardened Carbon Steel
Full Striker Plate
- Protection device - Hardened Carbon Steel
ENGINEERING SPECIFICATION SHEET
