ENGINEERING SPECIFICATION DATA SHEET
FGP-SS4-CHART
|
TracPipe
Part No. |
FGP-SS4-375
|
FGP-SS4-500
|
FGP-SS4-750
|
FGP-SS4-1000
|
FGP-SS4-1250
|
FGP-SS4-1500
|
FGP-SS4-2000
|
|
Size (inch)
|
3/8"
|
1/2"
|
3/4"
|
1"
|
1-1/4"
|
1-1/2"
|
2"
|
|
EHD
(AGA Size) |
15
|
19
|
25
|
31
|
37
|
46
|
62
|
|
Jacket O.D.
(max.) |
.668
|
.686
|
1.108
|
1.383
|
1.665
|
1.920
|
2.590
|
|
Inside Diameter
(nom) |
.440
|
.597
|
.820
|
1.040
|
1.290
|
1.525
|
2.060
|
|
Wall Thickness
(in.) |
.01
|
.01
|
.01
|
.01
|
.012
|
.012
|
.012
|
STRAIGHT AUTO-FLARE FITTINGS
|
1. ADAPTER -- Brass 2. INSERT -- Stainless Steel 3. NUT -- Brass 4. SPLIT-RINGS -- Brass 5. FLEXIBLE PIPE -- Stainless Steel |
|
||||||||||||||||||||||||
FLANGE MOUNT AUTO FLARE FITTINGS
|
1. ADAPTER -- Brass 2. INSERT -- Stainless Steel 3. NUT -- Brass 4. SPLIT-RINGS -- Brass 5. FLANGE -- Malleable Iron / Brass 6. FLEXIBLE PIPE -- Stainless Steel |
|
||||||||||||||||||
TracPipe® Flexible Gas Piping - SAMPLE SPECIFICATION
The gas piping material shall be TracPipe Corrugated Stainless Steel Tubing (CSST) by Omegaflex, Inc. or approved equal.
Pressure carrier shall be series 300 stainless steel per ASTM A240; no annealing or heat-treating permitted after corrugation operation.
Fittings shall be AutoFlare® mechanical attachment fittings, material: yellow with series 300 stainless steel insert.
Fittings shall terminate in cleanly cut taper pipe threads conforming to the Standard for Pipe Threads, General Purpose, ANSI/ASME B1.20.1.
A flared metal-to-metal seal shall be used to accomplish gas sealing. No elastomer sealing rings or fiber gaskets permitted.
Non-metallic jacket shall be colored yellow to visibly indicate conveyance of fuel gas.
Jacket material shall be non-halogenated, fire-retardant polyethyene. Polyvinyl chloride (PVC) is not permitted.
ASTM E84 Ratings shall be less than 14 for flame spread and smoke.
Pipe sizing and all installation requirements shall be per TracPipe Design and Installation Guide.