ARC 18
- 5' lengths are lightweight and easy to handle
- 67" Long x 16" Wide x 12" High (makes up 5')
PDF Sales Sheet- PDF Specification Sheet
- PDF Installation Guide
ARC 18 END CAP
- one is needed for both ends of the line
Gravelless Pipe
- corrugated single wall wrapped in geotextile fabric
- with 5/8" holes
- internal snap coupler is pre installed
- PDF Specification Sheet
- PDF Installation Sheet
HAN-FC-EZB-08 CAP
HAN-FC-RED-0804 8x4 OFFSET ADAP.
Internal Cap
- fits 8" Gravelless pipe
Offset Reducing Starter
- adapts 4" pipe to 8" Gravelless pipe
- comes standard with yellow SDR-35 ring
- can be changed to blue SCH-40 ring
Blind Tee
- can be used as a tee or a 90-Ell
- if used as a tee, side must be cut out
- can be used for Gravelless or Double-Wall
Double-Wall Pipe
- corrugated on outside
- smooth on inside
HAN-HIQ-080-10 8" x 10'
HAN-HIQ-080-20 8" x 20'
HAN-HIQ-100-10 10" x 10'
HAN-HIQ-100-20 10" x 20'
HAN-HIQ-120-10 12" x 10'
HAN-HIQ-120-20 12" x 20'
HAN-HIQ-120-24 12" x 24'
HAN-HIQ-150-10 15" x 10'
HAN-HIQ-150-20 15" x 20'
HAN-HIQ-150-24 15" x 24'
HAN-HIQ-180-10 18" x 10'
HAN-HIQ-180-20 18" x 20'
HAN-HIQ-180-24 18" x 24'
HAN-HIQ-240-10 24" x 10'
HAN-HIQ-240-20 24" x 20'
90-Ell
- Double-Wall Fabricated
- plain end
Corrugated Roll Pipe
- corrugated pipe
HAN-HP-040-100 4" x 100' PERF
HAN-HPS-040-100 4" x 100' PERF W/SOCK
HAN-HPS-040-250 4" x 250' PERF W/SOCK
HAN-HPS-040-CUT CUT IN MULTIPLES OF 25'
Corrugated to PVC Adapter
- fits inside 4" corrugated pipe
- fits over 4" Sch-40 pipe
Corrugated Pipe Adapter
- fits over 4" corrugated pipe
- fits into SDR-35 fitting
Tee
- fits over 4" corrugated pipe
Split Coupling
- for corrugated pipe
HAN-FC-CPS-08 8"
HAN-FC-CPB-10 10"
HAN-FC-CPB-12 12"
HAN-FC-CPB-15 15"
HAN-FC-CPB-18 18"
HAN-FC-CPB-24 24"
HAN-FC-CPB-30 30"
Internal Coupling
- for corrugated pipe
SnapOver Coupling
- for corrugated pipe
Internal Cap
- for corrugated pipe
HAN-FC-EZB-08 8"
