1/2 PT. Rectorseal T-PLUS-2

RectorSeal T Plus 2

• PTFE enriched
• Non-staining and non-separating
• Allows immediate pressurization
• For use with potable water (hot or cold)
• Formulated for plastic and metal pipe
• For pressures up to 10,000 psi (70MPa) (liquids) and 2,000 psi (14MPa) (gases)
• RectorSeal Brand

RectorSeal T Plus 2® is a non-hardening thread sealant containing PTFE plus synthetic fibers. These fibers are dispersed in a resinous base combined with inert mineral fillers to provide maximum sealing performance. Its low coefficient of friction allows tighter joint makeup with lower torque. It also breaks out easily without galling, seizing, or damaging threads. It is excellent for service where immediate pressurization is necessary. RectorSeal T Plus 2 is non-toxic in accordance with NSF Standard 61. In addition, it is approved and listed with the Canadian Standards Association (CSA).

Recommended Use:

• Acids, dilute
• Air, compressed
• Aliphatic solvents
• Ammonia, gaseous and liquid
• Caustics, dilute
• Cutting oils (low aromatic)
• Heating oils
• Helium, gaseous
• Hydraulic oils
• Hydrogen, gaseous
• Inert gases, gaseous
• Kerosene
• Liquified petroleum gases (butane, propane, mixtures)
• Mineral oils
• Natural gas
• Nitrogen, gaseous
• Refrigerants
• Soap, liquid
• Vegetable oils
• Water Cold
• Water Hot (203°F/95°C)

–Not recommended for oxygen.