Grab Bar Wall Anchor

Grab Bar Wall Anchor

• • Will Work with 1/2″ or 5/8″ Walls with Tile or Marble
  • Requires 1/2″ Wall Thickness
  • Rotating Flange Allows Grab Bar to be Installed at any Angel
  • Requires a 3½” Space Behind the Wall
  • Delta Brand

Caution and Safety Warnings:

• DO NOT install wall anchors into wallboard less than ½” or greater than 2 ½” thick.
• DO NOT install in a wall or on a surface that does not have at least 3½” of space behind the wall or surface material.
• DO NOT install wall anchors into wallboard that has been subjected to water damage or decay.
• DO NOT install wall anchors into a wood stud.
• Locate studs prior to drilling. Determine if plumbing, electrical or other obstructions, i.e. beads of adhesive or ribbing, as in some tub surrounds,
  are contained behind the wall.
• If mounting to an uneven surface, use silicone to fill any gaps between surface and mounting plate.