Water Well Pump Accessories
Typical Tank Cross Instalation
PUA-IC125 PVC TANK CROSS
861-140 1 X 8" NIPPLE PVC-SCH-80
PUA-PPS-LW PRESSURE SWITCH W/LOW WATER
PUA-RV50 1/2" PRESSURE RELIEF 75 LB
PGA-2100 PRESSURE GAUGE 2" x 100
VAB-101-305 1" CHECK VALVE (S.L.) BRASS
VAB-103-014 3/4 HOSE BIBB / H.D. BRASS
VAB-BV6F-010-E 1" BALL VALVE BRASS
BF-N-002-030 1/4" X 3" BRASS NIPPLE
PVC Tank Cross
- one 1-1/4" MIP x 1" FIP tap for tank
- two 1" MIP x 3/4" FIP for inlet and outlet
- one 3/4" FIP tap on front for hose bibb
- one 1/2" FIP tap on top for relief valve
- two 1/4" FIP taps on top for gauge and pressure switch
Brass Tank Cross
- cast bronze, short style
- one 1-1/4" MIP x 1" FIP tap for tank
- two 1" MIP x 3/4" FIP for inlet and outlet
- one 3/4" FIP tap on front for hose bibb
- one 1/2" FIP tap on top for relief valve
- two 1/4" FIP taps on top for gauge and pressure switch
Brass Tank Cross
- three 1-1/4" MIP x 1" FIP taps
- three 1/4" FIP taps on top
Brass Tank Cross
- two 1/2" taps and two 1/4" taps
Galvanized Tank Cross
- three 1" MIP taps for inlet, outlet, and tank
- one 1/2" FIP tap on front for relief valve or hose bibb
- two 1/4" FIP taps on top for gauge and pressure switch
Pressure Gauge
- ISO 9001
PGA-230 2" x 30-LB.
PGA-260 2" x 60-LB.
PGA-360 3-1/2" x 60-LB.
Pressure Gauge - Liquid Filled
- Stainless steel case
- Glycerine filled
- accuracy +/- 3-2-3%
- for use in high vibration, corrosion situations
PGA-25X100-LF 2-1/2" x 100-LB.
PGA-25X160-LF 2-1/2" x 160-LB.
PGA-25X200-LF 2-1/2" x 200-LB.
PGA-25X3060-LF VACUUM
Pressure Switch
- 9013FSG2
PUA-PPS-3050 30-50
PUA-PPS-4060 40-60
Pressure Switch
- with low water safty lever on side
- 9013FSG3
Push on Ell
- 1/4" push on Hose Barb x 1/4" MIP
Pressure Relief valve
- pre set at 75-lb.
- both sizes have 1/2" outlet
RV75 3/4"
Calibrated Pressure Relief Valve
- series 530
- adjustable pressure relief range 50-175 PSI
- designed for use as protection against excessive pressure build-up in systems containing water, oil and air.
- maximum tempirature 180° F.
- made by Watts
WATT-530C-007 3/4"
Snifter Valve
- 1/8" MIP on bottom
- used to pull air in to a well pump on the vacuum side
Air Volume Control
- repairable Brade style
- Zinc die-cast body
- Buna-n diaphragm and cap seal
- Brass springs and orfice
for tanks thru 42 gallon
PUA-AVC42 Pressure range 20-40,30-50,40-60
for tanks up to 42 gallon
Pressure range 20-40
for tanks up to 70 gallon
Air Volume Control
- non-repairable Brade style
- Zinc-plated steel construction
- buna-n diaphragm and air valve
- Brass spring and orfice (model No. AV45)
- Built-in ball check valve (model No. AV100)
PUA-AVC100 for tanks up to 120 gallon
Air Volume Control
- Imperial style
- ball type air charger
- also known as AC100
Air Volume Control
- Type-L
- with tubing and fittings
Air Volume Control
- Type-WJ
- deep well air release
Pump Mounting Bracket
- for mounting jet pumps on top of tanks
- fits most tanks with lug thread on top
Well Rope
- 3/16" polypropylene
- used as safty rope on submersible pumps
PUA-MR25-CUT CUT LENGTH
Submersible Well Wire
- also known as twisted pump cable
TPC-103WG 10-3 W/GROUND
Torque Arrestor
- installation accessory for submerible pumps
- mounts to 1" or 1-1/4" drop pipe, just above pump
- fits all well casings from 4" to 8" I.D.
Cable Guide
- keeps power cable from abrading against well casing
- a min. of 3 to 5 should be used; one at the pump, one no further than 15' above the pump, and one between 25' to 30' above the pump
- ready to use for 6" casing, cut off ears for 4" casing.
Heat Shrink Splicing Kit
- under water type splice - water proof
- heat with hand torch or hair dryer
- will shrink down to seal #14 wire
- set of 3
Splicing Kit
- under water type splice - water proof
- compression type
- set of 3
Brass Bleeder Orifices
- installes below check valve on submersible pumps for pressure bleed-off, alowing air inlet a snifter valve
- 3/4 MIP
Rubber Bleeder Orifices
- installes below check valve on submersible pumps for pressure bleed-off, alowing air inlet a snifter valve
- full 1" size molded of virgin rubber increases bleed capacity and reduces cost of pipe fitting
Brass Check Valve
- stainless steel spring for mounting in any position
VAB-101-304 3/4"
VAB-101-305 1"
VAB-101-306 1-1/4"
VAB-101-307 1-1/2"
VAB-101-308 2"
Brass Check Valve
- stainless steel spring for mounting in any position
- one 1/8" inlet tap - used for snifter valve
- one 1/4" outlet tap - used or gauge
VAB-101-316 1-1/4"
Brass Check Valve
- stainless steel spring for mounting in any position
- one 1/8" inlet tap - used for snifter valve
- one 1/8" and two 1/4" outlet tap
 |
 |
Brass Foot Valve
- brass body, stainless steel spring, washers, locknuts and strainer
- 200 PSI WOG working pressure
PUA-BFV-007 3/4"
PUA-BFV-010 1"
PUA-BFV-012 1-1/4"
PUA-BFV-015 1-1/2"
PUA-BFV-020 2"
Jet Assy Kit
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets
- includes nozzels and venturi for 1/2-HP throu 1-HP single stage pumps
- Flotec Brand
Cast-Iron Jet Assy less Foot Valve
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets -- 1-1/4" FIP bottom outlet
- uses Nozzle #53 & Venturi # J32P-28
- for 3/4-hp up to 70' deep
Cast-Iron Jet Assy less Foot Valve
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets -- 1-1/4" FIP bottom outlet
- uses Nozzle #51 & Venturi # J32P-29
- for 1-hp up to 50' deep
Cast-Iron Jet Assy less Foot Valve
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets -- 1-1/4" FIP bottom outlet
- uses Nozzle #53 & Venturi # J32P-22
- for 1/2-hp up to 60' deep
- for 1-hp from 50' to 90' deep
Cast-Iron Jet Assy less Foot Valve
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets -- 1-1/4" FIP bottom outlet
- uses Nozzle #53 & Venturi # J32P-20
- for 1/2-hp from 50' to 80' deep
- for 3/4-hp from 70' to 110' deep
Brass Jet Assy
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets
- for 1-hp from 50' to 80' deep
- A.Y. McDonnald Brand
Brass Jet Assy
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets
- for 1-hp from 80' to 120' deep
- A.Y. McDonnald Brand
Brass Jet Assy
- fits in 4" and larger wells
- 1" and 1-1/4" FIP top inlets
- for 3/4-hp from 80' to 110' deep
- A.Y. McDonnald Brand
Shallow Well Jet Kit
- for FP4300 Series Convertible Pumps (Plastic)
- Flotec Brand
Packer Well Head & Jet Kit
- fits 2" well housings
- Flotec Brand
Venturi and Nozzels
- fits Flotec, Simmer and Sta-Rite brands jets
J32P-20 Venturi - 41/128"
J32P-22 Venturi - 11/32"
J32P-24 Venturi - 3/8"
J32P-26 Venturi - 13/32"
J32P-28 Venturi - 7/16"
J32P-29 Venturi - 29/64"
J34P-41 NOZZLE NO. 51 - 17/64" ORIFICE
J34P-42 NOZZLE NO. 52 - 13/64" ORIFICE
J34P-43 NOZZLE NO. 53 - 7/32" ORIFICE
J34P-44 NOZZLE NO. 54 - 1/4" ORIFICE
J34P-45 NOZZLE NO. 55 - 5/16" ORIFICE
2" Packer Well Head
- fits over 2" well casings for packer installation
- connects to pump with 1" and 1-1/4" front face thread
- will also bolt to face of 8600 pump
3" Packer Well Head
- fits over 3" well casings for packer installation
- connects to pump with 1" and 1-1/4" front face thread
- Wayne brand
3" Packer Jet
- to be used with RB-6354 well head
- Wayne brand
Turned Coupling
- 1-1/4" galvanized coupling
- turned down very thin, used inside wells where standard couplings are to thick
Venturi Adapters
- MIP x Insert -- galvanized
- used to cover the venturi
PUA-S86-11/4X8 1-1/4" x 8" LONG
Well Seal
- one hole down pipe modle
PUA-WS-111 4 X 1 CAST-IRON
PUA-WS-112 4 X 1-1/4 CAST-IRON
PUA-WS-115 6 X 1-1/4 CAST-IRON
PUA-WS-1901 4 X 1 PVC
PUA-WS-1902 4 X 1-1/4 PVC
Well Seal
- two hole down pipe modle
PUA-WS-1905 4 X 1 X 1-1/4 PVC
PVC Well Screen
- PVC Sch-40
- with slot .010
- sold in 10' lengths
WS-040 4"
Pump-up Float Switch
- normally closed contacts for tank fill
- "Pump-up" operation
Liquid Level Control
- provides automatic low level cutoff protection for submersible pumps & deep well turbines
- permits efficient operation at full capacity and eliminates danger of pumping air or sand
Sump and Sewage Pump Accessories
Check Valve
- screws into sump pump
- 1-1/4" and 1-1/2" outlet
BAPA-66005 1-1/2
Check Valve
- for sewer pumps
- slips over pipe and seals with clamps
4150P 1-1/2" PLASTIC BODY
4200P 2" PLASTIC BODY
ZOP-1122 2" CAST-IRON BODY
Sump Pump Discharge Hose Kit
- includes 24 feet of corrugated hose which may be cut at 8 foot intervals
- one male adapter and one steel hose clamp
PUA-HK150 1-1/2"
Suction Strainer
- 2" FIP inlet, used with gas engine utility pumps
- corrosion resistant molded strainer for suction hose
- eliminates stones and leaves from clogging pump
Sump Pump Switch
- with piggyback plug
- 115-vt
- Flotec Brand
1-Bulb Pump Switch
- with 10' long piggyback plug
- 115 vt. -- 13 amp max.
- Zoeller Brand
2-Bulb Pump Switch
- with 15' long piggyback plug
- up to 48" of pump out
- bottom float is cut-on -- top float is cut-off
- 115 vt. -- 15 amp max.
- Zoeller Brand
2-Bulb Pump Switch
- with 15' long piggyback plug
- up to 48" of pump out
- bottom float is cut-on -- top float is cut-off
- 230 vt. -- 15 amp max.
- Zoeller Brand
 |
 |
Blue Angel / Wayne Pump Parts
Motor Insulation Oil
- used in most oil filled submersible pump motors
- sold per Pint Can
Control Valve
- used on deep-well top-mount pumps
- controls the back-presher of watter to the jet
