for PEX and Polybutylene Tubing
Coupling
- Flair-It connections on both sides
PEX200-005 1/2"
PEX200-007 3/4"
PEX200-073 1/2" X 3/8"
PEX200-101 3/4" X 1/2"
Ballcock Adapter
- Flair-It connection x toilet ballcock connection
- with swivel and self sealing washer
Female Adapter
- Flair-It connection x FIP
- non-swivel
PEX203-NS-007 3/4"
PEX203-NS-053 3/8" x 1/2"
PEX203-NS-074 1/2" x 3/4"
Female Adapter - Swivel
- Flair-It connection x FIP
- swivel with self sealing washer
PEX203-SW-007 3/4"
Male Adapter
- Flair-It connection x MIP
PEX204-007 3/4"
Elbow
- Flair-It connection x Flair-It connection
PEX207-005 1/2"
PEX207-007 3/4"
FIP Adapter Elbow - Swivel
- Flair-It connection x FIP
- swivel with self sealing washer
PEX207-3-007 3/4"
Drop Ear Elbow
- FIP x Flair-It connection
- with drop ears
Tee
- with 3 Flair-It connections
PEX211-005 1/2"
PEX211-007 3/4"
PEX211-094 3/4" X 1/2" X 1/2"
PEX211-101 3/4" X 3/4" X 1/2"
Adapter Tee
- with 2 Flair-It connections on each end and 1/2" MIP out center
Adapter Tee
- with 2 Flair-It connections on each end and 1/2" MIP out center
Plug
- used for pluging off the end tubing
PEX216-007 3/4"
Cap
- used for capping off Flair-It fittings
- also may be used as a FIP threaded cap for various applications.
PEX217-005 1/2"
PEX217-007 3/4"
PB Adapter Bushing
- required for flair-it fittings when hooking to 3/4" polybutylene tubing
- see example below
Step 1: Insert the plastic bushing into 3/4" tubing
Step 2: Slide nut over tubing and rock tubing onto fitting tubing is seated against the body of the fitting.
Step 3: Slide nut to threads and tighten securely
PEX Tubing
- coils
PEX-2C-100 3/8" x 100' Long
PEX-3C-100 1/2" x 100' Long
PEX-4C-100 3/4" x 100' Long
PEX-1C-CUT 1/4" Cut Length per Foot
PEX-2C-CUT 3/8" Cut Length per Foot
PEX-3C-CUT 1/2" Cut Length per Foot
PEX-4C-CUT 3/4" Cut Length per Foot
PEX Tubing
- straght lengths
- blue
PEX-4CB-20 3/4" x 20' Long
PEX Tubing
- straght lengths
- red
PEX-4CR-20 3/4" x 20' Long
PEX Tubing
- straght lengths
- white
PEX-4CW-20 3/4" x 20' Long
PEX-5CW-20 1" x 20' Long
Size No. -- I.D. Size -- O.D. Size
1 1/4" 3/8"
2 3/8" 1/2"
3 1/2" 5/8"
4 3/4" 7/8"
5 1" 1-1/8"
1 1/4" 3/8"
2 3/8" 1/2"
3 1/2" 5/8"
4 3/4" 7/8"
5 1" 1-1/8"
Note: All Flair-it connection sizes are per ID tubing size.
Plastic Pipe Cutter
Abbreviated Terms Used On This Page
- IPS - Iron Pipe Size
- MIP - Male Iron Pipe Thread
- FIP - Female Iron Pipe Thread
- ID - Inside Diameter
- OD - Outside Diameter
- CPVC - Chlorinated Poly Vinyl Chloride
- PEX - Crosslinked Polyethylene
- PB - Polybutylene
How To Use Flair-It Fittings
Step 1
Slide nut over tubing.
Step 2
Firmly press tubing onto the flair of the fitting until the tubing rests against the fitting.
Step 3
Slide the nut to the threads and tighten securely onto the fitting.
Step 1
Slide nut over tubing.
Step 2
Firmly press tubing onto the flair of the fitting until the tubing rests against the fitting.
Step 3
Slide the nut to the threads and tighten securely onto the fitting.
