Stainless Steel Clamps
- all stainless construction
SSC-M6 NO.6 MICRO-GEAR
SSC-8 NO.8 7/16" to 1"
SSC-12 NO.12 1/2" to 1-1/4"
SSC-16 NO.16 3/4" to 1-1/2"
SSC-20 NO.20 3/4" to 1-3/4"
SSC-28 NO.28 1-5/16 to 2-1/4"
SSC-36 NO.36 3/4" to 2-3/4"
SSC-40 NO.40 1" to 3"
SSC-52 NO.52 1-3/4" to 3-3/4"
SSC-56 NO.56 2" to 4"
SSC-64 NO.64 2-1/2" to 4-1/2"
SSC-72 NO.72 3" to 5"
SSC-80 NO.80 3-1/2" to 5-1/2"
SSC-88 NO.88 4" to 6"
SSC-104 NO.104 5" to 7"
SSC-116 NO.116
SSC-132 NO.132
SSC-152 NO.152
SSC-164 NO.164
Stainless Steel Clamps
- 10 gauge
- can be bent to fit most any size pipe
J Hook
- Copper plated steel
- For PVC and IPS size pipe, use one size larger
JH-010 1" CTS
Full Clamp "SIOUX STRAP"
- plastic clamp with preloaded nail.
- for Copper, CPVC, PolyButylene and PEX Tubing
- for PVC and IPS size pipe, use one size larger
PEX-551-3 3/4" NOM. TUBE
PEX-551-4 1" NOM. TUBE
Pipe Insulator
- for Copper, CPVC, PolyButylene and PEX Tubing
- for PVC and IPS size pipe, use one size larger
- use with standard 1-11/32" stud punch on metal stud projects
PEX-558-3 3/4" NOM. TUBE
Pex Tubing Support
- plastic turnout bend support for pex tubing
- holds supports tubing at 90° bend
PEX-507-007 3/4" NOM. TUBE
2 Hole Pipe Strap
- Galvanized - IPS
2HS-005 1/2" IPS
2HS-007 3/4" IPS
2HS-010 1" IPS
2HS-012 1-1/4" IPS
2HS-015 1-1/2" IPS
2HS-020 2" IPS
2HS-025 2-1/2" IPS
2HS-030 3" IPS
2HS-040 4" IPS
2 Hole Pipe Strap
- Copper Plated - CTS
2HS-C-007 3/4" CTS
1 Hole Pipe Strap
- Galvanized - IPS
1HS-007 3/4" IPS
1HS-010 1" IPS
1HS-012 1-1/4" IPS
1HS-015 1-1/2" IPS
1HS-020 2" IPS
Tie Wire
- Black
- aprox. 340' per roll
- 16 gauge annealed wire in one piece, one direction 3-1/2 lb. coils
Plastic Hanger Tape
- flexible, non-conductive polypropylene
- 3/4" wide, .050 thick
- 1/8" diameter holes every 3/4"
- 125 lb. ultimate load ASTM A-370-77
- can be cut with scissors or utility knife
- uses: pipe hanger, duct hanger and tubing utility strapping
JHT-50 3/4" x 50'
JHT-100 3/4" x 100'
Perforated Hanger Iron Strapping
- 24 Gauge
- alternating holes (bolt and nail)
524-100 3/4" x 100'
Duct Strapping
- 30 Gauge
- no holes
710-003 1-1/2" x 100'
Duct Strapping
- Polypropylene Strapping
- used for everyting from air-duct to tomato ties
Nylon Cable Ties
- bent tall, high tension strength, self-locking
- UL approved nylon 6/6, flammability rating 94V-2
- service temperatur - 14°F to 185°F
NCT-07-50 7.5" X 50-LB NATURAL BULK
NCT-12-50 12" X 50-LB NATURAL 10-PACK
NCT-14-50 14.5" X 50-LB NATURAL 8-PACK
NCT-36-120 36" X 120-LB NATURAL BULK
NCT-48-175 48" X 175-LB NATURAL BULK
NCT-B-07-50 7.5" X 50-LB BLACK 17-PACK
NCT-B-12-50 12" X 50-LB BLACK 10-PACK
NCT-B-14-50 14.5" X 50-LB BLACK 8-PACK
Stud Protector Plate
- also known as strud Guards
- protects pipeing and wiring from nails
- 18-ga.
530-5 1-1/2 X 5"
Stud Shoe
- stud / joist reinforcement when drilling or notching for pipe runs
- pipe opening accommodates 2" IPS or smaller pipe
- Four nail holes on each side
- 18 gauge galvanized
Strut
- also known as Supperstrut
- Steel - Zinc Plated
- 12 gauge
- 1-5/8" x 1-5/8" x 10' long
Strut Pipe Clamps
- Sizes are IPS
- for CTS - use one size smaller
BOLT-SPC-007 3/4" IPS
BOLT-SPC-010 1" IPS
BOLT-SPC-012 1-1/4" IPS
BOLT-SPC-015 1-1/2" IPS
BOLT_SPC-020 2" IPS
