Shower Drain
- fits over 2" Sch-40 DWV pipe
- drain body drops through shower base
- locknut tightens from underside
- 4-1/4" St.Steel top grid ( snap-in )
H.D. Shower Drain - PVC
- fits over 2" Sch-40 DWV pipe
- drain body is one piece.
- 4-1/4" St.Steel top grid ( 2-screws )
Shower Drain - No Caulk
- fits over 2" Sch-40 DWV pipe
- rubber gasket and locknut on inside
- wrench included
- 4-1/4" St.Steel top grid ( snap-in )
- brass version
- rubber gasket and locknut on inside
Adjustable Shower Drain
- PVC body - PVC spud - 4" st.steel grid
- fits over 2" pipe
- bolt-on clamping ring
- secure clamping of membrane
- dual weep holes
- recessed sump area for added drainage
DRP-ASD-8 PUSH-ON TYPE
Adjustable Shower Drain
- PVC body - chrome plated brass spud - 4" st.steel grid
- fits over 2" pipe
- bolt-on clamping ring
- secure clamping of membrane
- dual weep holes
- recessed sump area for added drainage
Adjustable Shower Drain
- cast-iron body - chrome plated brass spud
- bolt-on clamping ring
- secure clamping of membrane
- dual weep holes
- recessed sump area for added drainage
- caulk-on type - fits over 2" pipe
- gasket will convert it to push-on type
DRCI-ASD-G GASKET ONLY
Drain Extension
- 2" MIP x 2" FIP for 2" drain spuds
- use when additional height is required to overcome inconsistent concrete pours
- height extension from 1-1/2" to 3-1/2"
- solid brass construction
Fitting Socket Adapter
- fits into Sch-40 hub
- Female Thread to be used for drains or clean-outs
DRP-842-93P 3"
DRP-842-94P 4"
Adjustable Base
- fits over 2" Sch-40 DWV pipe
- 2" female for threded spuds
Adjustable Base
- fits over 3" or inside 4" Sch-40 DWV pipe
- 3" female for threded spuds
- tapped for Trap Primer with 1/2" IPS plug
Adjustable Base
- fits over 4" Sch-40 DWV pipe
- 4" female for threded spuds
- tapped for Trap Primer with 1/2" IPS plug
H.D. Adjustable Drain Base
- fits over PVC Sch-40 DWV pipe
- with primer tap -- inclues plug
- 4" female for threded spuds
DRP-D52-207 FITS OVER 4" PIPE
Cleanout Spud
- 6" polished brass top cover
- supplied with 3" IPS coutersunk plug
- 4" PVC male threded spuds
Square Cleanout Spud
- 7" nickel bronze top cover
- supplied with 3" IPS coutersunk plug
- 4" PVC male threded spuds
Adjustable Genral Spud
- PVC spud
- stainless steel strainer grid
DRP-AG3-6SS 3"MIP - 6" GRID
DRP-AG4-6SS 4"MIP - 6" GRID
Adjustable Genral Spud
- brass spud
- brass top strainer grid
DRP-AG3B-5NB 3"MIP - 5" NICHEL BRONZE GRID
DRP-AG4B-5NB 4"MIP - 5" NICHEL BRONZE GRID
Adjustable Genral Spud
- plastic spud
- square chrome plated brass top strainer grid
- uses replacement grid #C60-812
Snap-in Drain
- all plastic PVC
- fits into sch-40 DWV pipe
DRP-SI-030
DRP-SI-040
Snap-in Drain
- St.Steel top grid
- fits into sch-40 DWV pipe
Snap-in Clean-Out
- fits into sch-40 DWV pipe
DRP-SI-030-CO SS TOP
DRP-SI-040-CO SS TOP
General Purpose Drain
- fits over 2" or inside 3" Sch-40 DWV pipe
- 4" St.Steel top grid
General Purpose Drain
- fits over 3" or inside 4" Sch-40 DWV pipe
- 5-1/2" across top of grid
General Purpose Drain
- fits over 4" Sch-40 DWV pipe
- 5-1/2" across top of grid
DRP-GP-030-4 POLISHED ALUMINUM TOP GRID
Area Drain
- 6-3/16" across top lip
- 5" across strainter
- 2" fits over 2" or inside 3" sch-40 pipe
- 3" fits over 3" or inside 4" sch-40 pipe
Quad Drain
- 7-1/4" across top lip
- fits over 2" or inside 3" sch-40 pipe
Utility Drain
- snap-in lid
DRP-UD9-030 9"SQ.ACROSS TOP
DRP-UD9-040 9"SQ.ACROSS TOP
Heavy Duty Traffic Floor Drain
- full cast-iron grate and ring
- 8-1/2" diameter grate
Roof Drain
- full cast-iron dome
- dome has 50 sq. inches of drain area
- 10" dameter pan
Square Grate
- UV inhibitors to reduce sun damage
- durable polypropylene construction
- green in color
-4" SQUARE TOP
DRP-D-060-S FITS INTO 4" PIPE
-6" SQUARE TOP
DRP-D-090-S FITS INTO 6" PIPE
-9" SQUARE TOP
Atrium Grate
- UV inhibitors to reduce sun damage
- durable polypropylene construction
- green in color
DRP-D-040-A FITS INTO 4" PIPE
DRP-D-060-A FITS INTO 6" PIPE
Square Catch Basin Grates
- UV inhibitors to reduce sun damage
- durable polypropylene construction
DRP-D-120-SF 12" SQ. - GREEN
Square Catch Basin
- side outlet
- uses square grate
- uses any UA adapters
- black in color
Low Profile Square Basin
- low profile, bottom outlet
- uses square grate
- uses any UA adapters
- black in color
DRP-D-120-CBLP 12"
Universal Locking Outlet Adapter
- fits corrugated, SDR and Sch-40 pipe
- fits most catch basin outlets
- interchangeable with Dura, NDS, Tempo and others
DRP-D-UA-060 6" PIPE
DRP-D-UA-PLUG PLUG
Tuf Tite Drains
Link to Tuf-Tite Page
4-1/4" Snap-In Strainer
- 4-1/4" over all across the top
- with 4 snap-in ears to hold it in place.
DRC-D40-003 Pol.Brass - PVD
DRC-D40-AB Ant.Brass
DRC-D40-05NP Pearl Nickel
DRC-D40-05BN Brushed Nickel
DRC-D40-05WB Old World Bronze**
** Old World Bronze is equal to Delta's Venetian Bronze®
3-3/8" Strainer
- aprox. 3-3/8" (exactly 3.4125") over all across the top
- 2-3/4" center-to-center for screws
4" Strainer
- 4" over all across the top
- fits drains where stainer fits inside plastic lip
- 3-3/8" center-to-center for screws
- strainers are stamped unless noted
DRC-D54-010 Polished Brass
DRC-D54-ABCB Ant.Brass (Cast-Brass)
4-1/4" Strainer
- 4-1/4" over all across the top
- 3-3/8" center-to-center for screws
- strainers are stamped unless noted
- many other finishes avalible
DRC-C60-89BN Brushed Nickel
DRC-C60-89WB Old World Bronze
** Old World Bronze is equal to Delta's Venetian Bronze®
4-1/4" Strainer
- 4-1/4" over all across the top
- 2-5/8" center-to-center for screws
DRC-D41-102 Polished Brass
6-1/8" Strainer
- 6-1/8" over all across the top
- 4-7/8" center-to-center for screws
Perforated Grates
- Cast-Iron -- varios uses
- 1/4" thick
- epoxy coated for corrosion resistance
DRCI-PG-5 5" Dia.
DRCI-PG-6 6" Dia.
DRCI-PG-625 6-1/4" Dia.
DRCI-PG-63125 6-5/16" Dia.
DRCI-PG-65 6-1/2" Dia.
DRCI-PG-6625 6-5/8" Dia.
DRCI-PG-6875 6-7/8" Dia.
DRCI-PG-7 7" Dia.
DRCI-PG-8 8" Dia.
DRCI-PG-8875 8-7/8" Dia.
Perforated Grates
- Cast-Iron
- 6-3/4" Outside Dia.
- 5-1/2" on center screw holes
- 1/4" thick at edge
Bar Grates
- Cast-Iron -- varios uses
DRCI-BG30-534 5-3/4" x 1/4" Thick
DRCI-BG30-6 6" x 5/16" Thick
DRCI-BG30-658 6-5/8" x 1/4" Thick
DRCI-BG30-7 7" x 1/4" Thick
DRCI-BG30-8 7-7/8" x 5/16" Thick
Bar Grate with Legs
- goes inside cast-iron hub openings
DRCI-BG30L-030 3"
DRCI-BG30L-040 4"
DRCI-BG30L-060 6"
Bell Trap Drain
- Cast iron inside-caulk connection
CI-BT6-030 3"
CI-BT6-040 4"
Floor Drain with Trap
- one piece moldeddrain body
- deep 3-3/4" sump bowl and a full 3" trap seal
- concealed cleanout
- order optional backwater device seperately
DRCI-FD10-030 3"
DRCI-FD10-040 4"
DRP-FD10-020 2" PVC
Backwater Device
- prevents flooding due to back up
- for use with integral trap floor drains #FD10-020
- 2" MIP plastic body -- 2" throat
Backwate Valve
- flapper and cover has elastomeric gasket to ensure watertight seal
- stepped construction encourages flow (minimum 1/4" per foot fall)
- 3" and 4" modles are NSF approved and UPC approved!
BW400P 4" PVC
Sewer Popper
- Automatic pop-up releases sewage overflow outside the house
- threaded for 3" or 4" pipe or tapped adapter
Urinal Flange Kit
- 3-1/4" to 7" flange mounting centers
- kit includes bolts, nuts, washers and gasket
UF200P SPIGOT FITS INSIDE 2" FITTING
G-601 GASKET ONLY
Internal Pipe Cleanout
- allows pipe to be cut flush with floor or wall
- countersunk plug inluded
DRP-PCO-040 INSIDE 4" PIPE - 3" PLUG
Slotted Clean-out Plug
- countersunk slot
4818-CSK-040 4"
Saddle Tees and Kits
- kits include V-bolts, nuts and washers
- glues to SCH-40 PVC
- use gasket for SDR-35 or Cast-Iron
S26-005 4" X 2" Kit
S26-006 4" x 3" Kit
S26-007 4" X 4" Kit
S26-008 6" x 7" x 1/4" Gasket Only
V-BOLT-KIT-4 Bolt Set F/4" Kit
Mushroom Vent Cap
- fits oer 3" or 4" vent stacks
- includes three installation screws
Multi-Use Coupling
- both ends fit over 2" SCH-40 pipe -- or -- inside 3" SDR and SCH-40 pipe
Multi-Use Coupling
- both ends fit over 3" SCH-40 pipe -- or -- inside 4" SDR and SCH-40 pipe
Spigot Adapter
- 4" DWV hub x SDR spigot
Plastic Access Panels
- beveled edges
- indented screw holes in corners
Stainless Steel Floor and Wall Clean-Out Plates
- plates are 16-ga. Stainless Steel
- bolts are plated steel
C52-040 4" Dia. 16-ga.
C52-050 5" Dia. 16-ga.
C52-060 6" Dia. 16-ga.
C52-070 7" Dia. 16-ga.
C52-080 8" Dia. 16-ga.
C52-100 10" Dia. 16-ga.
B52-040 1/4" x 4" Bolt
B52-060 1/4" x 6" Bolt
