200 Series 
When you need a hard working electric valve to handle the toughest job, it just make sense to use Orbit's complete 200 series valves.
Tested and tried under the harshest conditions, you simply won't find a harder working reverse flow valve.Applications:
- Light commercial and residential projects.
- Balanced flow design keeps equal pressure on both sides of diaphragm while the valve is off, effectively increasing valve's longevity.
- Self-cleaning pilot-flow 90 mech (200 micron ) filter.
- Internal bleeding lever makes manual "at the valve operation easy and spray free.
- Molded with heavy-duty ultraviolet light resistant polyvinyl chloride (PVC).
- "Quick-slip" glue joint models available for fast, clean installation.
- Glass filled polypropylene lid for extra strength.
- Strong, injection molded Santaprene ® diaphragm exceeds industrial standards for strength, flexibility, and durability.
- Heavy-duty stainless steel spring and external bonnet hex head.
- Easy-to-use vandal resistant flow control stream allows flow 20% regulation at the valve.
- Captured solenoid plunger.
- Pressure: 15-150 PSI
- Flow Rate: 1 in. (26/34)* 5-40 GPM. For flow rates below three GPM or any low flow watering using micro emitters or micros sprays, use 200 mesh filter installed upstream from the valve.
- 24 VAC 50/60 cycle solenoid power requirements: 0.30 A (7.2 VA) in-rush current; 0.19 A (4.6 VA) holding current.
- 33 OHM models 24 VAC 50 Hz VA) inrush current; .258 A (6.20 VA) holding current; .15 A (3.75 VA).
- Height: With flow control: 5-1/2".
- Width: 4"
- Length: 4-1/2"
200 Series Electric Valve Valve Pressure Loss |
|
Flow GPM |
PSI Loss |
1 |
0.5 |
3 |
0.5 |
5 |
1.0 |
10 |
2.6 |
20 |
3.6 |
30 |
6.5 |
40 |
9.0 |
