Metal
Handy Box
  • 4" long x 2-1/8" wide x 1-7/8" deep
  • 1/2" knockouts
ELBM-HB-018

Handy Box Cover
  • 4" long x 2-1/8" wide
  • galvanized steel, with screw
ELBM-HBC-20   20-AMP RECEPTACLE
ELBM-HBC-B    BLANK
ELBM-HBC-D    DUPLEX
ELBM-HBC-T    TOGGLE
Switch Box
  • 2-1/4" deep with cut-in corners
  • with non-metallic sheathed cable clamps
ELBM-SB-022-RC
Switch Box
  • 2-1/4" deep with cut-in corners
  • with non-metallic sheathed cable clamps
  • with ears
ELBM-SB-022-RCE
Switch Box - Self Suporting
  • 2-1/2" deep
  • side clips grip walls for tight hold
  • with ears
ELBM-SB-RCE-SS
Switch Box
  • 2-1/2" deep - gangable
  • with ears
  • with 1/2" knockouts
ELBM-SB-025-005
Switch Box
  • 3-1/2" deep - gangable
  • less ears
ELBM-SB-035-005     1/2" knockouts
ELBM-SB-035-007     3/4" knockouts
Masonry Box
  • device screw holes are to inside of box
ELBM-MB-025-1G    1-GANG 2-1/2" DEEP
ELBM-MB-025-2G    2-GANG 2-1/2" DEEP
ELBM-MB-025-3G    3-GANG 2-1/2" DEEP
ELBM-MB-025-4G    4-GANG 2-1/2" DEEP
ELBM-MB-035-1G    1-GANG 3-1/2" DEEP
ELBM-MB-035-2G    2-GANG 3-1/2" DEEP
ELBM-MB-035-3G    3-GANG 3-1/2" DEEP
ELBM-MB-035-4G    4-GANG 3-1/2" DEEP
4" Octagon Box
  • standard 1-1/2" deep
  • 1/2" knockouts
ELBM-OB-005
3-1/4" Octagon Box
  • standard 1-1/2" deep
  • 1/2" knockouts
  • smaller size for small light fixtures
ELBM-OB-032
4" Octagon Box
  • standard 1-1/2" deep
  • one 1/2" K.O.
  • with romex clamps
ELBM-OB-RC
4" Octagon Box
  • standard 1-1/2" deep
  • one 1/2" knockouts
  • with romex clamps and ears
ELBM-OB-RCE
4" Octagon Box Extension Ring
  • standard 1-1/2" deep
  • 1/2" and 3/4" knockouts
ELBM-OB-EX015
4" Octagon Box Cover
  • blank
ELBM-OBC-FB
4" Square Box
  • 1/2" and 3/4" knockouts
ELBM-4S-015-101    1-1/2" DEEP
ELBM-4S-021-101    2-1/8" DEEP
4" Square Box - With Bracket
  • type CV brackets allow box to be mounted to flat side of metal or wood studs
  • 1/2" and 3/4" knockouts
ELBM-4S-021-WB
4" Square Extension Ring
  • 1-1/2" deep
  • 1/2" knockouts
ELBM-4S-EX015
4" Square Cover - Flat Blank
  • fits 4" square boxes and extentions
  • flat blank
ELBM-4SC-FB
Raised Surface Twin Duplex
  • fits 4" square boxes and extentions
  • 1/2" deep raised surface
  • for mounting 2 duplex receptacles
ELBM-4SC-RS2D
Raised Surface Twin Toggle
  • fits 4" square boxes and extentions
  • 1/2" deep raised surface
  • for mounting 2 toggle switchs
ELBM-4SC-RS2T
Plaster Ring
  • fits 4" square boxes and extentions
  • rased 5/8" for in wall installation
  • for mounting a single device
ELBM-4SPR-S006
4-11/16" Square Box
  • 1/2" and 3/4" knockouts
  • 2-1/8" deep
  • mounting screws for plaster ring included
ELBM-41116-021
Plastic
Swith Box
  • thermoplastic
  • 1-gang nail on
ELBP-1G
Swith Box - Self Suporting
  • thermoplastic
  • 2-7/8" deep
  • 1-gang self suporting with ears
ELBP-1G-SS
Swith Box
  • thermoplastic
  • 2-gang nail on
ELBP-2G
Swith Box
  • thermoplastic
  • 3-gang nail on
ELBP-3G
Swith Box
  • thermoplastic
  • 4-gang nail on
ELBP-4G
Ceiling Box
  • thermoplastic
  • includes captive nails for new work
  • 3-7/8" round x 2-1/4" deep
ELBP-CB
Ceiling Box - Self Suporting
  • thermoplastic
  • includes snap-in brackets for old work
  • 4-1/4" round x 2-11/16" deep
ELBP-CB-SS
Ceiling Box
  • thermoplastic
  • 4" round x 2-5/16" deep
  • mounted on 16" bar hanger
ELBP-CG-16
Ceiling Box
  • thermoplastic
  • 4" round x 2-5/16" deep
  • mounted on 24" bar hanger
ELBP-CB-24
Junction Box
  • 6" x 6" x 4" molded non-metallic
  • NEMA 6P rated for direct burial
  • Gasketed lid attached with stainless steel screws
ELBP-626053
Weatherpoof
Weatherproof Box
  • aluminum single gang
  • three threaded holes
  • 4-5/8" tall x 2-7/8" wide x 2" deep
ELBW-1G-005-3     1/2"
ELBW-1G-007-3     3/4"
Weatherproof Box
  • aluminum single gang
  • five threaded holes
  • 4-5/8" tall x 2-7/8" wide x 2" deep
ELBW-1G-005-5     1/2"
Weatherproof Box
  • aluminum single gang
  • five threaded holes
  • 4-5/8" tall x 2-7/8" wide x 2" deep
ELBW-1G-007-5     3/4"
Weatherproof Cover
  • aluminum and die cast zinc
  • single gang
  • fits large power receptacles 2.125" dia.
ELBW-1GC-50
Weatherproof Cover
  • aluminum die cast
  • single gang
  • blank
ELBW-1GC-B
Weatherproof Cover
  • gray thermoplastic plastic
  • single gang
  • duplex
ELBW-1GC-D
Weatherproof Cover
  • die cast aluminum
  • single gang
  • fits GFCI receptacles
ELBW-1GC-GFI
Weatherproof Cover
  • gray thermoplastic plastic
  • single gang
  • for single receptacles and switchs
ELBW-1GC-S
Weatherproof Box
  • aluminum 4" round
  • five 1/2" threaded holes
  • 4" dia. x 1-9/16" deep
ELBW-4R-005-5
Weatherproof Cover
  • 1/2" tapping holes
  • gasket, plug and screws included
  • aluminum color
ELBW-4RC-3A
Weatherproof Lampholder
  • 1/2" threaded arm with sockt sealing gasket
  • aluminum color
ELBW-LH-A
Last updated 09/13/2019