|
RECTORSEAL®
NO. 5® |
Description
|
Characteristics
| Applications | Packaging
| Instructions | Precautions
| Specifications |
Limited Warranty
RectorSeal® No. 5® is our most popular thread sealant. It has withstood the test of time in a variety of uses and is widely known as the "standard of the industry."
RectorSeal® No. 5® is a soft setting, slow drying thread sealant made from special inert fillers dispersed in an oleoresinous base to facilitate its application to threaded pipe connections.
RectorSeal® No. 5® is a unique, versatile and reliable sealant that is non-toxic in accordance with NSF Standard 61. In addition, it is Underwriters Laboratories Inc. (UL) classified, listed under the Uniform Plumbing Code (IAPMO) File No. 1282, and it is approved and listed with the Canadian Standards Association (CSA). It also complies with Federal Specification TT-S-1732.
|
|
RectorSeal® No. 5® is recommended for pipe made of galvanized steel, iron, brass, copper, aluminum, stainless steel, polyethylene, reinforced fiberglass, and PVC. DO NOT USE ON ABS - use RectorSeal® No. 100 VirginT or RectorSeal® T Plus 2®.
RectorSeal® No. 5® is recommended for pipe carrying:
Acids, Dilute | Gasohol (unleaded Gasoline and 10% Alcohol) | Natural Gas |
Air, Compressed | Heating oils | Nitrogen, Gaseous |
Ammonia- Gaseous, Liquid | Helium, Gaseous | Petroleum Solvents |
Aliphatic Solvents | Hydraulic Oils | Soap, Liquid |
Caustic, Dilute | Hydrogen, Gaseous | Steam |
Cutting Oils (Low Aromatic) | Inert Gases | Vegetable Oils |
Diesel Fuel Oil | Kerosene | Water (Hot or Cold) |
Freons | Liquified Petroleum Gases (Butane, Propane, Mixtures) | |
Gasoline (Leaded Unleaded) | Mineral oils |
Code | Size | Qty. Per Case | Lbs. per Case | Cu. Ft Per Case |
25790 | 1 3/4 oz. display (50 g) | 24 tubes | 4 | .13 |
25780 | 1 3/4 oz. bulk (50 g) | 48 tubes | 6 | .23 |
25631 | 1/4 pint brush top (118 ml) | 24 cans | 11 | .18 |
25551 | 1/2 pint brush top (237 ml) | 24 cans | 21 | .45 |
25431 | Pint brush top (473 ml) | 12 cans | 20 | .43 |
25300 | Quart brush top (946 ml) | 12 cans | 37 | .78 |
25271 | Gallon friction top (3.8 L) | 4 cans | 46 | .94 |
25191 | 5 Gallon (18.9 L) | 1 pail | 57 | 1.12 |
25112 | 55 Gallon (208 L) | 1 drum | 623 | 9.01 |
FOR CHEMICAL EMERGENCY, SPILL, LEAK, FIRE, EXPOSURE OR
ACCIDENT,
CALL CHEMTREC - DAY OR NIGHT 1-800-424-9300
CAUTION - COMBUSTIBLE
PRECAUTIONS: Vapors combustible. May be harmful if swallowed or inhaled. May cause eye and skin irritation. Keep away from heat, sparks, and flames until vapors are gone. Use only with good cross-ventilation. Avoid breathing vapors and contact with skin, eyes and clothing. Wash after handling. FIRST AID: For any overexposure, get immediate medical attention after first aid is given. Eyes - Flush 15 minutes with clean water. Skin - Wash with soap and water. Inhalation - Remove to fresh air. Ingestion - Only if conscious, give large amounts of water and DO NOT INDUCE VOMITING. FIRE AND SPILLS: For fire, use water fog, CO2, foam, or dry chemicals. Wipe up spills to prevent footing hazard. STORAGE AND HANDLING: Store in cool, well-ventilated area. Keep container upright and tightly closed. Do not reuse empty container. KEEP OUT OF REACH OF CHILDREN.
For additional information, refer to Material Safety Data Sheet.
Wt/Gal @ 77 degree F | 10.8 +- .5 lbs/gal. |
Flash Point SETA CC | 150 degree F |
Color | Yellow |
Shelf Life | 2 years |
Federal Specification | TT-S-1732 |
CLASSIFIED BY UNDERWRITERS LABORATORIES INC.® AS TO FIRE HAZARD ONLY. RECTORSEAL NO. 5 CLASSED 20 TO 30 BETWEEN PARAFFIN OIL AND KEROSENE IN RESPECT TO FIRE HAZARD. FOR USE IN DEVICES HANDLING GASOLINE, PETROLEUM OILS, NATURAL GAS (PRESSURE NOT OVER 100 PSIG), PROPANE AND BUTANE. 32R2
"Meets CSA Requirements 4-90 Working Temperature Range
-40°F to 125°F.
Maximum Working Pressure: 125 psi.
For Use With Natural Gas L.P. Gases (VAPOR STATE ONLY).
Use on Steel, Galvanized Steel, Iron, Brass, Copper and
Aluminum.
For Pipe Size Up To And Including 1 1/4 Inch".
Suggestions and recommendations covering the use of our products are based on our past experience and laboratory findings. However, as we have no control as to the methods and conditions of application, we only assume responsibility for the uniformity of our products within manufacturing tolerances.
RectorSeal makes the Limited Express Warranty that when
the instructions for storage and handling of our products are followed
we warrant our products to be free from defects. THIS LIMITED EXPRESS WARRANTY
IS EXPRESSLY IN LIEU OF ANY OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING
ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
AND OF ANY OTHER OBLIGATION ON THE PART OF RECTORSEAL. The sole remedy
for breach of the Limited Express Warranty shall be the refund of the purchase
price. All other liability is negated and disclaimed, and RectorSeal shall
not be liable for incidental or consequential damages.
MANUFACTURED BY
RectorSeal · 2601 Spenwick Drive · Houston, Texas
77055, USA
Telephone 1-713-263-8001 Fax 1-713-263-7577
Toll free: 1-800-231-3345 Fax: 1-800-441-0051