|
- single state
- snap-action
- 24 volts and millivolt application
HET-1C20-101
|
|
- single state
- snap-action
- 24 volts application
HET-1C26-101
|
|
- single state
- mercury bulb style contacts
- 24 volts application
HET-1E30-910
|
|
- single state
- mercury bulb style contacts
- 24 volts application
- universal style - for fossil fuel or electric heat/cool
HET-1E56-444
|
|
- single state
- mercury bulb style contacts
- 24 volts application
- universal style - for fossil fuel or electric heat/cool
HET-1F56-444
|
|
- LCD Programmable
- 4 different temperature controls each day
- voltage supply: 2 x AA Batteries
- Installation Manual
HET-661234
|
|
- single state
- mercury bulb style contacts
HET-1F35-910
|
|
- manual changeover
- dual mercury cell arrangement on a single bimetal coil
- thermostat mounts to subbase with positive grasping captive screws
- subbase included
HET-1F58W-72
|
|
- heat only
- works with virtually any furnace
- millivolt, c-wire, and 24-volt systems
- requires 2 AA batteries (sold separately)
HET-781-151
|
|
- foot mount
- 120 volt primary
- 16 volt secondary
- 15 watts
TF-120/16-15
|
|
- foot mount
- 120/208/240 volt primary
- 24 volt secondary
- 40 VA
TF-120/24-40
|
|
- 11" long element
- 65 to 220 degrees fan off
- 50 to 205 degrees fan on
- with cover
HEA-5D51-78
|
|
- general purpose
|
Coil Volts |
Amps |
Pole |
HEA-90-170 |
24 |
40 |
3 |
HEA-90-171 |
120 |
40 |
3 |
HEA-90-172 |
240 |
40 |
3 |
HEA-90-244 |
24 |
30 |
2 |
HEA-90-247 |
24 |
40 |
2 |
|
|
- RBM Type 84 Enclosed SPDT
- 1/4" quick connect
HEA-90-293Q
|
|
- RBM Type 184 H.D. Enclosed SPNO/SPNC
- 1/4" quick connect
HEA-90-380
|
|
- RBM Type 91, 2-Pole, double throw, 24-vt. coil
- semi-enclosed
- overall dimensions: 2-1/8" x 1-7/8" x 2-1/4"
- suited for fan controls, HVAC, heat pumps, appliances, vending machines and general purpose switching
HEA-90-340
|
|
- Time delay "on" time delay "off"
- 24 vac control voltage
- blower-on time 0-4 min. adj.
- blower-off time 0-4 min. adj.
RFA-BC-7070
|
|
- SPST, closes on rise, fan type
- dial knob allows for any temperature setting
|
Range °F |
Differential °F |
HEA-HF-AT21 |
90-130 |
20 |
HEA-HF-AT22 |
140-180 |
20 |
|
|
- SPST, closes on rise, fan type
|
Close °F |
Open °F |
HEA-HF110 |
110 |
90 |
HEA-HF120-10 |
120 |
110 |
HEA-HF120-15 |
120 |
105 |
HEA-HF120-20 |
120 |
100 |
HEA-HF130 |
130 |
110 |
HEA-HF140 |
140 |
120 |
HEA-HF150 |
150 |
130 |
HEA-HF160 |
160 |
140 |
|
|
- SPST, opens on rise, limit type
- dial knob allows for any temperature setting
|
Range °F |
Differential °F |
HEA-HL-AT12 |
135-170 |
20 |
HEA-HL-AT13 |
175-215 |
40 |
HEA-HL-AT14 |
210-250 |
40 |
|
|
- SPST, opens on rise, limit type
|
Open °F |
Close °F |
HEA-HL150 |
150 |
130 |
HEA-HL180 |
180 |
140 |
HEA-HL190 |
190 |
150 |
HEA-HL200 |
200 |
160 |
HEA-HL250 |
250 |
210 |
HEA-HL300 |
300 |
260 |
|
|
- used in Marsh Brand and Day & Night Heaters
- SPST, opens on rise, limit type
- manual reset
- L135F
HEA-PS-2268
|
|
- SPST
- On: 1-20s, Off: 40-110s
-
Replaces --
Diversitech DGS101
Gemline GS101
Jepco TD03
Klixon 60000AOM
Mars 33241
Watsco TDR10
White-Rodgers 24A34-1
HEA-L36-475
|
|
- SPST
- On: 30-90s, Off: 1-30s
-
Replaces --
Componant HR3570
Diversitech DGS102
Gemline GS102
Klixon A012
Mars 33242
Watsco TDR15
White-Rodgers 24A34-2
HEA-L36-476
|
|
- DPDT
- On: 1-20s, Off: 40-110s
-
Replaces --
Componant HR2475
Diversitech DGS103
Gemline GS103
Jepco TD12
Klixon E017
Mars 33244
Watsco TDR20
White-Rodgers 24A34-3
HEA-L36-477
|
|
- DPDT
- On: 30-90s, Off: 1-30s
-
Replaces --
Componant HR4075
Diversitech DGS104
Gemline GS104
Jepco TD34
Klixon 51172-22
Mars 33245
Watsco TDR25
White-Rodgers 24A34-4
HEA-L36-478
|
|
- DPDT-SPST
- On: 1-110s, Off: 1-110s
-
Replaces --
Diversitech DGS105
Gemline GS105
Klixon 51172-32
Mars 33232
Watsco TDR25
White-Rodgers 24A34-5
HEA-L36-479
|
|
- 2-DPDT
- On: 1-110s, Off: 1-110s
-
Replaces --
Diversitech DGS106
Gemline GS106
Klixon 51172-33
Mars 33233
White-Rodgers 24A34-6
HEA-L36-480
|
|
- 1/2" inlet
- choice of 3 outlets - 1/2" out the sides and 3/4" out the end
- factory set for natural gas
- LP conversion kit included
- uses standing pilot and thermocouple
- 24 volt coil
HEV-36C03-333
|
|
- 3/4" inlet and outlet
- factory set for natural gas
- LP conversion kit included
- uses standing pilot and thermocouple
- 24 volt coil
HEV-36C03-433
|
|
- 1/2" inlet
- choice of 3 outlets - 1/2" out the sides and 3/4" out the end
- factory set for natural gas
- LP conversion kit included
- uses standing pilot and millivolt generator
- millivolt coil
HEV-36C03U-333
|
|
- remote bulb thermostat built-in
- 1/2" inlet and outlet
- factory set for natural gas
- uses standing pilot and thermocouple
HEV-710-205
|
|
- 1/2" inlet and outlet
- uses standing pilot and thermocouple
- no outside power required
HEV-764-742
HEV-9011
|
|
- automatically shuts off flow of gas if pilot light goes out
- can be used with home or RV gas water heaters and wall furnaces
- replaces all common thermocouples
- copper tubing body
- adapters included
- 30mv. output
1151 18"
H06E-24 24"
H06E-30 30"
H06E-36 36"
H06E-48 48"
H06E-72 72"
1082 36" - HEAVY DUTY
|
|
- with energy cut-off
- 30mv. output
H06F-24 24"
|
|
- the simple way to convert any standard thermocouple to the junction block type thermocouple where high temperature energy cut-off is incorporated in appliance operation.
HEA-F145-1109
|
|
- use this with thermocouple to convert to spade type
HEA-F145-1110
|
|
- 750 millivolt
- fiberglass cable leads
- with PG9 adapter
- F spade clip - connectior type
HEA-G01A-512
- 750 millivolt
- fiberglass cable leads
- R bushing - connectior type
HEA-101934R32
- 250 millivolt
- fiberglass cable leads
- F spade clip - connectior type
HEA-3105
- 250 millivolt
- copper tube jacket
- R Bushing - connectior type
HEA-3104
|
|
- short style f/ vent free heaters
- 27" long
- replaces Robertshaw 446-511
- part numbers 34820 446-511 72956
HEA-TC-001
|
|
- short style f/ vent free heaters
- 24" long
HEA-TC-002
|
|
- short style f/ vent free heaters
- 24" long
HEA-TC-003
|
|
- short style f/ vent free heaters
- 59" long
HEA-TC-004
|
|
- short style f/ vent free heaters
- 33" long
HEA-TC-005
|
|
- made by Johnson Controls
- Natural and LP gas orifices included
- mounting brackets on all four sides
- flame type - right side
HEA-J995MDA
|
|
- made by Johnson Controls
- Natural and LP gas orifices included
- mounting brackets on all four sides
- flame type - left side
HEA-J997MDA
|
|
- made by Johnson Controls
- Natural and LP gas orifices included
- mounting brackets on all four sides
- flame type - both side
HEA-J998MDA
|
|
- made by Johnson Controls
- Natural and LP gas orifices included
- mounting brackets on all four sides
- three tapped holes in each bracket
HEA-J999MKA Shell
HEA-J999MYA "Y" Channel
HEA-J999MHA "L" Channel
|
|
- used on floor furnices and others
- with 750-milivolt generator
- natural gas
- same as Empire R715N
EMP-762119
|
|
- quick action 1/2 turn full open or closed.
- surge dampened gauges reduce pointer flutter
- with R-410a temperature scale
- pull-out proof replaceable hanging hook
- 1/4" SAE flare fittings
- less hoses
- Uniweld brand
RFA-47500
|
|
- color-coded durable nylon handwheels
- surge dampened gauges reduce pointer flutter
- with R-410a temperature scale
- pull-out proof replaceable hanging hook
- all inlet fittings are replaceable
- 1/4" SAE flare fittings
- less hoses
- Gentec brand
RFA-MB2-F-R410A
|
|
- with R-410a temperature scale
- pull-out proof replaceable hanging hook
- 1/4" SAE flare fittings
- with 3' (red, yellow, blue) hoses
- AsianFirst Brand
RFA-CZFCG
|
|
- quick action 1/2 turn full open or closed.
- with R-507, R-404a and R-134a temperature scales
- pull-out proof replaceable hanging hook
- 1/4" SAE flare fittings
- less hoses
- Uniweld brand
RFA-46550
|
|
- 500 PSI maximum working pressure
- 2500 PSI burst pressure
- compatible to CFC, HCFC and HFC refrigerants
- 1/4" SAE flare
- Gentec brand
RFA-HMS-24-003 SET OF 3 -- 3' LONG
RFA-HMS-24-005 SET OF 3 -- 5' LONG
RFA-HSB-24-005 5' BLUE
RFA-HSR-24-005 5' RED
RFA-HSY-24-005 5' YELLOW
|
|
- for use with R-134a, R-404a and R-507
- 2-1/2" X 500 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G9LD
|
|
- for use with R-134a, R-404a and R-507
- both presher and vacuum sides
- 2-1/2" X 120 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G10LD
|
|
- for use with R-12, R-22 and R-502
- 2-1/2" X 500 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G29LD
|
|
- for use with R-12, R-22 and R-502
- both presher and vacuum sides
- 2-1/2" X 250 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G30LD
|
|
- for use with R-410a
- 2-1/2" X 800 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G529LD
|
|
- for use with R-410a
- both presher and vacuum sides
- 2-1/2" X 500 PSI
- surge dampened gauges reduce pointer flutter
- 1/8" MIP thread inlet
- metal case and brass plate
RFA-G530LD
|
|
- 1/4" male SAE flair X 1/2" - 20 UNF ACME female
RFA-MSA-45
|
|
- used to provide access fitting without having to remove refrigerant from system
- can be mounted in any position
- retracting needle ensures no restriction
- hex wrench included
- adapter sleeves included
- fits 1/4", 5/16" and 3/8"
RFA-QTM-1
|
|
- used to provide access fitting without having to remove refrigerant from system
- can be mounted in any position
- retracting needle ensures no restriction
- hex wrench included
- adapter sleeves included
- fits 1/2" and 5/8"
RFA-QTM-2
|
|
- used to provide access fitting without having to remove refrigerant from system
- can be mounted in any position
- retracting needle ensures no restriction
- hex wrench included
- adapter sleeves included
- fits 3/16" and 1/4"
RFA-QTM-3
|
|
- copper to copper brazing
- steel pin with shraeder core penetrates line in one operation
- neoprene "O" ring seals
- come with standard 1/4" SAE male flare connection
RFA-CS4 1/4"
RFA-CS5 5/16"
RFA-CS6 3/8"
|
|
- Access Valves provide a servicing aperture to facilitate recovery or recharge of refrigerants
- come with standard 1/4" SAE male flare connections
- with 2" long copper stub out
RFA-AVX-2 1/8"
RFA-AVX-3 3/16"
RFA-AVX-4 1/4"
RFA-AVX-5 5/16"
RFA-AVX-6 3/8"
|
|
- inlet is 1/8" MIP or 1/4" O.D. solder
- 1/4" male flare access with core depressor
RFA-AVU-24 1/8"
|
|
- 1/4" male x swivel nut on run
- with core depressor
RFA-AVS-4
|
|
- 1/4" male x swivel nut on run
- 1/4" male flare access with core depressor on branch
RFA-AVS-44
|
|
RFA-QC-4R
|
|
RFA-VVC-1
|
|
- all steel valve core remover and storage container
- comes with 4 valve cores
RFA-VCR-1
|
|
- permits easy installation of new core in access fitting without loss of gas or charge
RFA-VCRT
|
|
- Neo shut off stem assy.
- replacement for VCRT
RFA-VCRT-38
|
|
- Neo shut off stem assy.
- replacement for VCRT
RFA-VCRT-39
|
|
- 1/4" square on one side
- 5/16" hex on the other
- flip over for reversing
- Discontinued - check for avalibility
RFA-TL-12
|
|
- 3/16" square and 1/4" square on one side
- 5/16" square and 3/8" square on the other
- push button ratchet release on both ends
RFA-TL-13
|
|
- set of 7
- Discontinued - check for avalibility
RFA-TL-15
|
|
- with moisture indicator
- installs between liquid line dryer and refrigerant metering device
RFA-96-IHL3SS 3/8" SWEAT
RFA-96-IHL4SS 1/2" SWEAT
RFA-96-IHL3FM 3/8" FLAIR
RFA-96-IHL4FM 1/2" FLAIR
|
|
- compatible with all existing and new refrigerants and blends
- for heat pump or reverse cycle application
RFA-96-TBF083S 3/8" SWEAT
|
|
- compatible with all existing and new refrigerants and blends
RFA-96-TD032S 1/4" SWEAT
RFA-96-TD082 1/4" FLAIR
RFA-96-TD082S 1/4" SWEAT
RFA-96-TD083 3/8" FLAIR
RFA-96-TD083S 3/8" SWEAT
RFA-96-TD163S 3/8" SWEAT
RFA-96-TD164 1/2" FLAIR
|
|
- compatible with all existing and new refrigerants and blends
RFA-96-TS085S 5/8"
RFA-96-TS086S 3/4"
RFA-96-TS166S 3/4"
RFA-96-TS167S 7/8"
RFA-96-TS309S 1-1/8"
|
HEA-F145-0018 THERMOCOUPLE TESTER
HEA-L37-343 1/2" X 1/2" GAS REGULATOR
HEA-RV48L-66 3/4" X 3/4" GAS REGULATOR
RFA-VCRT-37 REPLACEMENT NEO.RING F/VCRT
|